Unit Outlines
Electrical Engineering Technology: Assessment And Revision
AI Generated
Intermediate
90 hours
10 topics
Learning Objectives
5 objectives- Understand fundamental principles and concepts of electrical engineering technology.
- Develop skills in analyzing and designing electrical circuits using various tools and techniques.
- Gain knowledge of electrical components, measurement instruments, and safety regulations.
- Apply troubleshooting and maintenance techniques to electrical systems.
- Explore emerging technologies and their impact on the field of electrical engineering.
Content Outline
PreviewUnit 3590: Electrical Engineering Technology
1. Introduction to Electrical Engineering Technology
- Overview of electrical engineering technology
- Key principles and concepts
- Applications in industry and everyday life
- Essential terminology and foundational knowledge
2. Circuit Analysis and Design
- Basic electrical circuit concepts (voltage, current, resistance, power)
- Circuit laws: Ohm's Law, Kirchhoff's Laws
- Series and parallel circuits
- Techniques for circuit analysis (Thevenin, Norton, mesh and nodal analysis)
- Introduction to circuit design principles
- Use of simulation software (e.g., SPICE, Multisim) for circuit design and analysis
3. Electrical Components and Devices
- Passive components: resistors, capacitors, inductors
- Characteristics and behavior in circuits
- Applications
- Semiconductor devices: diodes, transistors, thyristors
- Operating principles
- Typical applications
- Other devices: transformers, relays, switches
4. Electrical Measurements and Instrumentation
- Measurement techniques for voltage, current, resistance, power, and energy
- Instruments used: multimeters, oscilloscopes, wattmeters, ammeters, voltmeters
- Calibration procedures and standards
- Data acquisition and analysis for electrical measurements
5. Digital Electronics
- Introduction to digital logic
- Logic gates: AND, OR, NOT, NAND, NOR, XOR, XNOR
- Binary arithmetic and number systems
- Boolean algebra and simplification techniques
- Combinational logic circuits (adders, multiplexers, encoders, decoders)
- Sequential logic circuits (flip-flops, counters, registers)
- Applications of digital systems in electronics
6. Power Systems and Distribution
- Power generation methods
- Transmission and distribution systems
- Power factor and correction techniques
- Electrical protection systems: circuit breakers, fuses, relays
- Safety considerations in power systems
7. Control Systems
- Fundamentals of control theory
- Feedback and feedforward control
- Types of controllers: P, PI, PID
- Sensors and actuators overview
- Applications of control systems in electrical engineering
8. Electrical Safety and Regulations
- Electrical hazards and risk assessment
- Safety practices and procedures
- Relevant codes and standards (e.g., NEC, IEC)
- Personal protective equipment (PPE)
- Emergency response and first aid
9. Troubleshooting and Maintenance
- Diagnosing electrical faults
- Systematic troubleshooting approaches
- Common electrical problems and solutions
- Preventive maintenance practices
- Repair procedures and documentation
10. Emerging Technologies in Electrical Engineering
- Renewable energy systems (solar, wind, etc.)
- Smart grids and smart metering
- Internet of Things (IoT) in electrical systems
- Automation and robotics
- Trends and future directions
Unlock the full outline
Get the complete content outline, learning outcomes and assessment methods for Electrical Engineering Technology: Assessment And Revision.
KSh 20 one-off, or included with a plan
Learning Outcomes
Unlock the outline above to see learning outcomes.
Assessment Methods
Unlock the outline above to see assessment methods.